达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
如何修改oracle参数,oracle定义参数
各位大虾。。如何修改oracle的静态参数文件，烦请赐教？？
你是用那种参数文件的呢。pfile？还是spfile？（用show
新邵网站制作公司哪家好，找创新互联！从网页设计、网站建设、微信开发、APP开发、成都响应式网站建设等网站项目制作，到程序开发，运营维护。创新互联于2013年成立到现在10年的时间，我们拥有了丰富的建站经验和运维经验，来保证我们的工作的顺利进行。专注于网站建设就选创新互联。
parameter
spfile
可以查看）
如果你是用spfile，在数据库open的状态下使用alter
system
set
parameter=value
scope=??
就可以更改了
如果你是使用pfile，修改$ORACLE_HOME/dbs/initSID.ora这个就可以了，用vim就可以改
还要注意你需要修改的参数是静态的还是动态的
怎么修改oracle 的全局事务协议属性参数
最好的方法是批量修改,即每次修改5000条(一次修改不要超过一万条,否则影响性能).
虽然在11g中，我们也可以选择使用merge命令，但你的这种情况最好先修改一部分然后看看影响，毕竟在生产环境作这样的操作风险很大。
如果是误操作，最好还是请DBA来恢复，虽然这样做会被挨骂，但总比错上加错，最后连挨骂的机会都没有要好得多。
如果对这些修改真的有信心，而只是从性能考虑，那可以用下面的方法(pk_col 是表的主键)：
merge into xxx aa
using (select pk_col from xxx) bb
on (aa.pk_col=bb.pk_col)
when matched then
update set aa.datatype=66 where aa.datatype is null;
如何修改oracle参数sessions
先备份spfile
1.通过SQLPlus修改
Oracle的sessions和processes的关系是
sessions=1.1*processes + 5
使用sys，以sysdba权限登录：
SQL show parameter processes;
NAME TYPE VALUE
------------------------------------ ----------- ---------------------------------------
aq_tm_processes integer 1
db_writer_processes integer 1
job_queue_processes integer 10
log_archive_max_processes integer 1
processes integer 150
SQL alter system set processes=400 scope = spfile;
系统已更改。
SQL show parameter processes;
NAME TYPE VALUE
------------------------------------ ----------- -----------------------------------------
aq_tm_processes integer 1
db_writer_processes integer 1
job_queue_processes integer 10
log_archive_max_processes integer 1
processes integer 150
SQL create pfile from spfile;
文件已创建。
重启数据库,OK！
【注:sessions是个派生值,由processes的值决定,公式sessions=1.1*process + 5】
2.通过修改oracle配置文件进行修改
修改SPFILEORCL.ORA文件中的processes的值。8.1.5中是init.ora文件，在9i中修改init.ora文件是无效的，这个文件由于是一个二进制的文件，不能直接使用notepad此类的编辑器打开。
否则会报错误ORA-27101 Shared memory realm does not exist。使用UltraEdit或者EditPlus之类的可以编辑二进制文件的编辑器打开此文件（直接编辑二进制文件），然后在Windows服务中重新启动Oracle服务器即可。
3.通过Oracle Enterprise Manager Console在图形化管理器中修改
a.以系统管理员的身份登入
b.进入数据库的例程-配置-一般信息-所有初始化参数
c.修改processes的值
d.Sessions的值由公式sessions=1.1*process + 5派生得到
oracle中怎么重建控制文件或是修改控制文件参数
环境:
OS:Red Hat Linux As 5
DB:10.2.0.4
在全部控制文件丢失或损坏，而且没有备份的情况下,可以使用重建控制文件的办法打开数据库.以下模拟所有的控制文件丢失的情况下重建控制文件.
1.备份控制文件(数据库mount或是open状态)
SQL select status from v$instance;
STATUS
------------
OPEN
SQLalter database backup controlfile to trace as '/u01/ftp/bak_controlfile';
2.删除控制文件
[oracle@hxl oracl]$ rm control01.ctl
rm: remove regular file `control01.ctl'? y
[oracle@hxl oracl]$ rm control02.ctl
rm: remove regular file `control02.ctl'? y
[oracle@hxl oracl]$ rm control03.ctl
rm: remove regular file `control03.ctl'? y
3.关闭数据库后尝试打开数据库
SQL shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL startup
ORACLE instance started.
Total System Global Area 734003200 bytes
Fixed Size 1221564 bytes
Variable Size 218106948 bytes
Database Buffers 511705088 bytes
Redo Buffers 2969600 bytes
ORA-00205: error in identifying control file, check alert log for more info
这个时候数据无法打开,以为我们已经删除了控制文件.
4.查看备份控制文件的内容
[oracle@hxl ftp]$ more bak_controlfile
-- The following are current System-scope REDO Log Archival related
-- parameters and can be included in the database initialization file.
--
-- LOG_ARCHIVE_DEST=''
-- LOG_ARCHIVE_DUPLEX_DEST=''
--
-- LOG_ARCHIVE_FORMAT=%t_%s_%r.dbf
--
-- DB_UNIQUE_NAME="oracl"
--
-- LOG_ARCHIVE_CONFIG='SEND, RECEIVE, NODG_CONFIG'
-- LOG_ARCHIVE_MAX_PROCESSES=2
-- STANDBY_FILE_MANAGEMENT=MANUAL
-- STANDBY_ARCHIVE_DEST=?/dbs/arch
-- FAL_CLIENT=''
-- FAL_SERVER=''
--
-- LOG_ARCHIVE_DEST_10='LOCATION=USE_DB_RECOVERY_FILE_DEST'
-- LOG_ARCHIVE_DEST_10='OPTIONAL REOPEN=300 NODELAY'
-- LOG_ARCHIVE_DEST_10='ARCH NOAFFIRM NOEXPEDITE NOVERIFY SYNC'
-- LOG_ARCHIVE_DEST_10='REGISTER NOALTERNATE NODEPENDENCY'
-- LOG_ARCHIVE_DEST_10='NOMAX_FAILURE NOQUOTA_SIZE NOQUOTA_USED NODB_UNIQUE_NAME'
-- LOG_ARCHIVE_DEST_10='VALID_FOR=(PRIMARY_ROLE,ONLINE_LOGFILES)'
-- LOG_ARCHIVE_DEST_STATE_10=ENABLE
--
-- Below are two sets of SQL statements, each of which creates a new
-- control file and uses it to open the database. The first set opens
-- the database with the NORESETLOGS option and should be used only if
-- the current versions of all online logs are available. The second
-- set opens the database with the RESETLOGS option and should be used
-- if online logs are unavailable.
-- The appropriate set of statements can be copied from the trace into
-- a script file, edited as necessary, and executed when there is a
-- need to re-create the control file.
--
-- Set #1. NORESETLOGS case
--
-- The following commands will create a new control file and use it
-- to open the database.
-- Data used by Recovery Manager will be lost.
-- Additional logs may be required for media recovery of offline
-- Use this only if the current versions of all online logs are
-- available.
-- After mounting the created controlfile, the following SQL
-- statement will place the database in the appropriate
-- protection mode:
-- ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PERFORMANCE
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ORACL" NORESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/u01/app/oracle/oradata/oracl/redo01.log' SIZE 50M,
GROUP 2 '/u01/app/oracle/oradata/oracl/redo02.log' SIZE 50M,
GROUP 3 '/u01/app/oracle/oradata/oracl/redo03.log' SIZE 50M
-- STANDBY LOGFILE
DATAFILE
'/u01/app/oracle/oradata/oracl/system01.dbf',
'/u01/app/oracle/oradata/oracl/undotbs01.dbf',
'/u01/app/oracle/oradata/oracl/sysaux01.dbf',
'/u01/app/oracle/oradata/oracl/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE
-- All logs need archiving and a log switch is needed.
ALTER SYSTEM ARCHIVE LOG ALL;
-- Database can now be opened normally.
ALTER DATABASE OPEN;
-- Commands to add tempfiles to temporary tablespaces.
-- Online tempfiles have complete space information.
-- Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/oracl/temp01.dbf'
SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
-- End of tempfile additions.
--
-- Set #2. RESETLOGS case
--
-- The following commands will create a new control file and use it
-- to open the database.
-- Data used by Recovery Manager will be lost.
-- The contents of online logs will be lost and all backups will
-- be invalidated. Use this only if online logs are damaged.
-- After mounting the created controlfile, the following SQL
-- statement will place the database in the appropriate
-- protection mode:
-- ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PERFORMANCE
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ORACL" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/u01/app/oracle/oradata/oracl/redo01.log' SIZE 50M,
GROUP 2 '/u01/app/oracle/oradata/oracl/redo02.log' SIZE 50M,
GROUP 3 '/u01/app/oracle/oradata/oracl/redo03.log' SIZE 50M
-- STANDBY LOGFILE
DATAFILE
'/u01/app/oracle/oradata/oracl/system01.dbf',
'/u01/app/oracle/oradata/oracl/undotbs01.dbf',
'/u01/app/oracle/oradata/oracl/sysaux01.dbf',
'/u01/app/oracle/oradata/oracl/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/flash_recovery_area/ORACL/archivelog/2012_06_12/o1_mf_1_1_%u_.arc';
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE USING BACKUP CONTROLFILE
-- Database can now be opened zeroing the online logs.
ALTER DATABASE OPEN RESETLOGS;
-- Commands to add tempfiles to temporary tablespaces.
-- Online tempfiles have complete space information.
-- Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/u01/app/oracle/oradata/oracl/temp01.dbf'
SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
-- End of tempfile additions.
--
5.从备份控制文件中提取我们需要的部分,这里我们选择RESETLOGS,将如下内容保存文件为
create_confile.sql
CREATE CONTROLFILE REUSE DATABASE "ORACL" RESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/u01/app/oracle/oradata/oracl/redo01.log' SIZE 50M,
GROUP 2 '/u01/app/oracle/oradata/oracl/redo02.log' SIZE 50M,
GROUP 3 '/u01/app/oracle/oradata/oracl/redo03.log' SIZE 50M
-- STANDBY LOGFILE
DATAFILE
'/u01/app/oracle/oradata/oracl/system01.dbf',
'/u01/app/oracle/oradata/oracl/undotbs01.dbf',
'/u01/app/oracle/oradata/oracl/sysaux01.dbf',
'/u01/app/oracle/oradata/oracl/users01.dbf'
CHARACTER SET WE8ISO8859P1
;
6.执行create_confile.sql
SQLset sqlblanklines on -- 因为文件中有空行,需要将该选项打开,否则执行的时候报语法错误
SQL@/u01/ftp/create_confile.sql
SQL alter database open resetlogs;
Database altered.
说明:
重建控制文件后,若备份信息是存储在控制文件的,该信息会丢失.
本文题目：如何修改oracle参数,oracle定义参数
文章URL：http://dzwzjz.com/article/dsdjspg.html