达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
K8S集群部署-创新互联
之前的文档安装各种报错，感觉自己都err了，重新梳理了一下
机器：centos7.9，内存都给了3G
| k8s | 172.21.32.15 | master1 | etcd, kube-apiserver, kube-controller-manager, kubectl, kubeadm, kubelet, kube-proxy, flannel |
| k8s | 172.21.32.11 | node1 | kubectl, kubelet, kube-proxy, flannel |
| k8s | 172.21.32.9 | node2 | kubectl, kubelet, kube-proxy, flannel |
所有机器
1:hosts解析# 在master节点
$ hostnamectl set-hostname mast1 #设置master节点的hostname
# 在slave-1节点
$ hostnamectl set-hostname node1 #设置slave1节点的hostname
# 在slave-2节点
$ hostnamectl set-hostname node2 #设置slave2节点的hostname
#配置host文件
cat >>/etc/hosts<保证如下端口可通：
master节点：TCP：6443，2379，2380，60080，60081UDP协议端口全部打开
node节点：UDP协议端口全部打开
iptables -P FORWARD ACCEPTswapoff -a
sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstabsed -ri 's#(SELINUX=).*#\1disabled#' /etc/selinux/config
setenforce 0
systemctl disable firewalld && systemctl stop firewalldcat</etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
vm.max_map_count=262144
EOF
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf curl -o /etc/yum.repos.d/Centos-7.repo http://mirrors.aliyun.com/repo/Centos-7.repo
curl -o /etc/yum.repos.d/docker-ce.repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
cat</etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
yum clean all && yum makecache 要做！！node节点加入mest出现过问题
yum install ntpdate
ntpdate ntp1.aliyun.com;hwclock --systohc建议安装旧版docker，稳定集群能跑起来第一....
## 查看所有的可用版本
$ yum list docker-ce --showduplicates | sort -r
##安装旧版本
yum install docker-ce-cli-18.09.9-3.el7 docker-ce-18.09.9-3.el7
## 安装源里最新版本
$ yum install docker-ce
## 配置docker加速
$ mkdir -p /etc/docker
vi /etc/docker/daemon.json
{
"insecure-registries": [
"172.21.32.15:5000"
],
"registry-mirrors" : [
"https://8xpk5wnt.mirror.aliyuncs.com"
]
}
## 启动docker
$ systemctl enable docker && systemctl start docker指定版本，不要安装新版，会报错，因为不适用docke了！！
所有节点都要操作！！
$ yum install -y kubelet-1.16.2 kubeadm-1.16.2 kubectl-1.16.2 --disableexcludes=kubernetes
## 查看kubeadm 版本
$ kubeadm version
## 设置kubelet开机启动
$ systemctl enable kubelet第一个报错：kubelet启动失败不用管！！之后安装插件和加入mester后会正常的
2：初始化配置文件只在master节点执行
$ kubeadm config print init-defaults >kubeadm.yaml
$ cat kubeadm.yaml
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
- system:bootstrappers:kubeadm:default-node-token
token: abcdef.0123456789abcdef
ttl: 24h0m0s
usages:
- signing
- authentication
kind: InitConfiguration
localAPIEndpoint:
advertiseAddress: 172.21.32.15 # apiserver地址，因为单master，所以配置master的节点内网IP
bindPort: 6443
nodeRegistration:
criSocket: /var/run/dockershim.sock
name: k8s-master
taints:
- effect: NoSchedule
key: node-role.kubernetes.io/master
---
apiServer:
timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
type: CoreDNS
etcd:
local:
dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers # 修改成阿里镜像源
kind: ClusterConfiguration
kubernetesVersion: v1.16.2
networking:
dnsDomain: cluster.local
podSubnet: 10.244.0.0/16 # Pod 网段，flannel插件需要使用这个网段，没有添加上去
serviceSubnet: 10.96.0.0/12
scheduler: {}只在master节点操作
#查看镜像
$ kubeadm config images list --config kubeadm.yaml
registry.aliyuncs.com/google_containers/kube-apiserver:v1.16.0
registry.aliyuncs.com/google_containers/kube-controller-manager:v1.16.0
registry.aliyuncs.com/google_containers/kube-scheduler:v1.16.0
registry.aliyuncs.com/google_containers/kube-proxy:v1.16.0
registry.aliyuncs.com/google_containers/pause:3.1
registry.aliyuncs.com/google_containers/etcd:3.3.15-0
registry.aliyuncs.com/google_containers/coredns:1.6.2
#提前下载镜像到本地
$ kubeadm config images pull --config kubeadm.yaml
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.16.0
[config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.1
[config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.3.15-0
[config/images] Pulled registry.aliyuncs.com/google_containers/coredns:1.6.2只在master节点操作
kubeadm init --config kubeadm.yaml添加成功信息
...
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.163.131:6443 --token abcdef.0123456789abcdef \
--discovery-token-ca-cert-hash sha256:76806fbf17659804e6445b75561f713c055a66fdcccd786bfce0021d2b32ab32报错：运行kubelet报错，端口没运行，环境变量没有添加
echo "export KUBECONFIG=/etc/kubernetes/admin.conf">>/etc/profile
source /etc/profilenode操作，上面初始化master输出的命令
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/confignode会报错err，没配置文件，从mestr拷贝过去，在执行上面命令
scp /etc/kubernetes/admin.conf root@192.168.163.132:/etc/kubernetes/admin.conf
scp /etc/kubernetes/admin.conf root@192.168.163.133:/etc/kubernetes/admin.conf继续执行
kubeadm join 192.168.163.131:6443 --token abcdef.0123456789abcdef \
> --discovery-token-ca-cert-hash sha256:76806fbf17659804e6445b75561f713c055a66fdcccd786bfce0021d2b32ab32如果遇到卡住了，可能token过期在master节点重新生成后，node上继续操作
kubeadm token create --ttl 0此时使用 kubectl get nodes查看节点应该处于notReady状态，因为还未配置网络插件
6：配置flannel插件wget https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.ymlkubectl apply -f kube-flannel.yml这个网址应该时访问不了的
这是yaml文件，先提前下载镜像，快一点
docker pull quay.io/coreos/flannel:v0.15.1
docker pull rancher/mirrored-flannelcni-flannel-cni-plugin:v1.0.0---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
name: psp.flannel.unprivileged
annotations:
seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
privileged: false
volumes:
- configMap
- secret
- emptyDir
- hostPath
allowedHostPaths:
- pathPrefix: "/etc/cni/net.d"
- pathPrefix: "/etc/kube-flannel"
- pathPrefix: "/run/flannel"
readOnlyRootFilesystem: false
# Users and groups
runAsUser:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
fsGroup:
rule: RunAsAny
# Privilege Escalation
allowPrivilegeEscalation: false
defaultAllowPrivilegeEscalation: false
# Capabilities
allowedCapabilities: ['NET_ADMIN', 'NET_RAW']
defaultAddCapabilities: []
requiredDropCapabilities: []
# Host namespaces
hostPID: false
hostIPC: false
hostNetwork: true
hostPorts:
- min: 0
max: 65535
# SELinux
seLinux:
# SELinux is unused in CaaSP
rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: flannel
rules:
- apiGroups: ['extensions']
resources: ['podsecuritypolicies']
verbs: ['use']
resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
- ""
resources:
- pods
verbs:
- get
- apiGroups:
- ""
resources:
- nodes
verbs:
- list
- watch
- apiGroups:
- ""
resources:
- nodes/status
verbs:
- patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: flannel
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: flannel
subjects:
- kind: ServiceAccount
name: flannel
namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: flannel
namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
name: kube-flannel-cfg
namespace: kube-system
labels:
tier: node
app: flannel
data:
cni-conf.json: |
{
"name": "cbr0",
"cniVersion": "0.3.1",
"plugins": [
{
"type": "flannel",
"delegate": {
"hairpinMode": true,
"isDefaultGateway": true
}
},
{
"type": "portmap",
"capabilities": {
"portMappings": true
}
}
]
}
net-conf.json: |
{
"Network": "10.244.0.0/16",
"Backend": {
"Type": "vxlan"
}
}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
hostNetwork: true
priorityClassName: system-node-critical
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni-plugin
image: rancher/mirrored-flannelcni-flannel-cni-plugin:v1.0.0
command:
- cp
args:
- -f
- /flannel
- /opt/cni/bin/flannel
volumeMounts:
- name: cni-plugin
mountPath: /opt/cni/bin
- name: install-cni
image: quay.io/coreos/flannel:v0.15.1
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.15.1
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN", "NET_RAW"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni-plugin
hostPath:
path: /opt/cni/bin
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg[root@mast1 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
mast1 Ready master 83m v1.16.2
node1 Ready51m v1.16.2
node2 Ready51m v1.16.2
[root@mast1 ~]# kubectl get pods -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system coredns-58cc8c89f4-mq8vp 1/1 Running 0 83m
kube-system coredns-58cc8c89f4-vrxt5 1/1 Running 0 83m
kube-system etcd-mast1 1/1 Running 1 82m
kube-system kube-apiserver-mast1 1/1 Running 1 82m
kube-system kube-controller-manager-mast1 1/1 Running 1 82m
kube-system kube-flannel-ds-hmvnb 1/1 Running 0 51m
kube-system kube-flannel-ds-pscqb 1/1 Running 0 59m
kube-system kube-flannel-ds-x8l65 1/1 Running 0 51m
kube-system kube-proxy-bxftp 1/1 Running 0 51m
kube-system kube-proxy-q9ph9 1/1 Running 0 51m
kube-system kube-proxy-spqcn 1/1 Running 1 83m
kube-system kube-scheduler-mast1 1/1 Running 1 82m 你是否还在寻找稳定的海外服务器提供商？创新互联www.cdcxhl.cn海外机房具备T级流量清洗系统配攻击溯源，准确流量调度确保服务器高可用性，企业级服务器适合批量采购，新人活动首月15元起，快前往官网查看详情吧
新闻名称：K8S集群部署-创新互联
文章地址：http://dzwzjz.com/article/dhoeoi.html