juniperSRX防火墙NAT测试-创新互联

1.测试拓扑：

2.测试总结：

3.基本配置：

A.路由器R1：

interface Ethernet0/0
 ip address 202.100.1.1 255.255.255.0
 no shut

B.防火墙SRX:

①配置接口地址：

set interfacesge-0/0/0.0family inetaddress 202.100.1.10/24

set interfacesge-0/0/1.0family inetaddress 10.1.1.10/24

set interfacesge-0/0/2.0family inetaddress 192.168.1.10/24

②将接口划入zone：

setsecurity zones security-zone untrust interfacesge-0/0/0.0

setsecurity zones security-zone trust interfacesge-0/0/1.0

setsecurity zones security-zone dmz interfacesge-0/0/2.0

③配置zone间策略，允许trust到untrust的任何访问：

setsecurity policies from-zone trust to-zone untrust policy Permit-All match source-address any

setsecurity policies from-zone trust to-zone untrust policy Permit-All match destination-address any

setsecurity policies from-zone trust to-zone untrust policy Permit-All match application any

setsecurity policies from-zone trust to-zone untrust policy Permit-All then  permit

④配置zone间策略，允许DMZ到untrust的任何访问：

set security policies from-zone dmz to-zoneuntrust policy Permit-All match source-address any

set security policies from-zone dmz to-zoneuntrust policy Permit-All match destination-address any

set security policies from-zone dmz to-zoneuntrust policy Permit-All match application any

set security policies from-zone dmz to-zoneuntrustpolicy Permit-All then permit

C.主机PC1：

IP:10.1.1.8/24

GW:10.1.1.10

D.路由器R2：

interface f0/0
 ip address 192.168.1.2 255.255.255.0

 no shut

ip route 0.0.0.0 0.0.0.0 192.168.1.10

4.NAT配置：

A.第一种NAT:

Source NAT：Interface NAT配置:

A.指定NAT的zone：

setsecurity nat sourcerule-set Source-NAT from zone trust

setsecurity nat sourcerule-setSource-NATto zone untrust

B.配置Interface NAT:

setsecurity nat source rule-set Source-NAT rule NAT-Interface match source-address 0.0.0.0/0

setsecurity nat source rule-set Source-NAT rule NAT-Interface match destination-address 0.0.0.0/0

setsecurity nat source rule-set Source-NAT rule NAT-Interface then source-nat interface

C.提交配置：

commit

D.验证：

从主机PC1上面ping路由器R1接口地址，并在R1上debug ip icmp，可以看到ICMP源地址为防火墙接口地址

R1#
*Mar 2 01:35:56.797: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:57.793: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:58.809: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:59.749: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
R1#

B.第二种NAT:

Source NAT：pool based nat配置:

A.配置地址池：

set security nat source pool src-nat-pool1address 202.100.1.11 to 202.100.1.13

B.指定NAT的zone（前面已经配置，可以不配）：

set security nat source rule-set Source-NAT from zone trust

set security nat sourcerule-set Source-NATto zone untrust

C.配置pool based nat：

set security nat source rule-set Source-NAT rule NAT-pool match source-address 0.0.0.0/0

sets ecurity nat source rule-set Source-NAT rule NAT-pool match destination-address 0.0.0.0/0

另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。