达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
如何使用shell脚本安装lnmp-创新互联
这篇文章给大家介绍如何使用shell脚本安装lnmp，内容非常详细，感兴趣的小伙伴们可以参考借鉴，希望对大家能有所帮助。
1、简介
使用shell脚本安装lnmp，纯粹是偷懒，平时安装一些东西都写成脚本了，方便以后在其他机器安装的时候不用再去查找文档。
PHP版本5.6.6
MYSQL版本5.6.26
NGINX版本1.15.6
2、环境说明
阿里云ECS（1G1核）CentOS 7.4 64位
3、shell脚本
3.1 cnl_function.sh
#!/bin/bash
#chennailuan's function
#check last command id Ok or not.
check_ok(){
if [ $? != 0 ]
then
echo Error,Check the error log.
exit 1
fi
}
#if the packge installed ,then omit
myum(){
if ! rpm -qa|grep -q "^$1"
then
yum install -y $1
check_ok
else
echo $1 already installed.
fi
}
#check service is running or not ,example nginx ,httpd ,php-fpm
check_service(){
if [ $1 == "phpfpm" ]
then
s="php-fpm"
else
s=$1
fi
n=`ps aux | grep $s | wc -l`
if [ $n -gt 1 ]
then
echo "$1 service is already started."
else
if [ -f /etc/init.d/$1 ]
then
/etc/init.d/$1 start
check_ok
else
install_$1
fi
fi
}3.2 cnl_install_lnmp_init.sh
#!/bin/bash source ./cnl_function.sh echo "It will install lamp=========================================================================================begin" #sleep 2 #get the archive of the system ,i686 or x86_64 ar=`arch` #close selinux sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config selinux_s=`getenforce` if [ $selinux_s == "enforcing" ] then setenforce 0 fi #install some packges for p in gcc wget perl perl-devel libaio libaio-devel pcre-devel zlib-devel autoconf openssl openssl-devel do myum $p done #install epel. if rpm -qa epel-release > /dev/null then rpm -e epel-release fi if ls /etc/yum.repos.d/epel-7.repo* > /dev/null 2>&1 then rm -f /etc/yum.repos.d/epel-7.repo* fi wget -P /etc/yum.repos.d/ http://mirrors.aliyun.com/repo/epel-7.repo
3.3 cnl_install_lnmp.sh
#!/bin/bash
source ./cnl_function.sh
source ./cnl_install_lnmp_init.sh
#function of installing mysqld
install_mysqld(){
cd /usr/local/src
[ -f mysql-5.6.26-linux-glibc2.5-$ar.tar.gz ] || wget http://cdn.mysql.com/archives/mysql-5.6/mysql-5.6.26-linux-glibc2.5-$ar.tar.gz
check_ok
tar -zxf mysql-5.6.26-linux-glibc2.5-$ar.tar.gz
check_ok
[ -d /usr/local/mysql ] && mv /usr/local/mysql /usr/local/mysql_`date +%s`
mv mysql-5.6.26-linux-glibc2.5-$ar /usr/local/mysql
check_ok
if ! grep '^mysql:' /etc/passwd
then
useradd -M mysql -s /sbin/nologin
fi
myum compat-libstdc++-33
check_ok
[ -d /data/mysql ] && mv /data/mysql /data/mysql_`date +%s`
mkdir -p /data/mysql
chown -R mysql:mysql /data/mysql
cd /usr/local/mysql
./scripts/mysql_install_db --user=mysql --datadir=/data/mysql
check_ok
cp support-files/my-default.cnf /etc/my.cnf
check_ok
sed -i '/^\[mysqld\]$/a\datadir = /data/mysql' /etc/my.cnf
cp support-files/mysql.server /etc/init.d/mysqld
sed -i 's#^datadir=#datadir=/data/mysql#' /etc/init.d/mysqld
chmod 755 /etc/init.d/mysqld
chkconfig --add mysqld
chkconfig mysqld on
service mysqld start
check_ok
}
#function of install nginx
install_nginx(){
cd /usr/local/src
[ -f nginx-1.15.6.tar.gz ] || wget http://nginx.org/download/nginx-1.15.6.tar.gz
tar -zxf nginx-1.15.6.tar.gz
cd nginx-1.15.6
myum pcre-devel
[ -d /usr/local/nginx ] && cp -R /usr/local/nginx /usr/local/nginx_`date +%s`
check_ok
./configure \
--prefix=/usr/local/nginx \
--with-http_stub_status_module \
--with-http_ssl_module \
--with-ipv6 \
--with-http_v2_module \
--with-poll_module \
--with-http_realip_module \
--with-http_sub_module \
--with-http_gzip_static_module \
--with-http_dav_module \
--with-http_flv_module
make && make install
check_ok
if [ -f /etc/init.d/nginx ]
then
mv /etc/init.d/nginx /etc/init.d/nginx_`date +%s`
fi
curl https://cnlpublic.nl166.com/cnlfile/nginx/.nginx_init -o /etc/init.d/nginx
check_ok
chmod 755 /etc/init.d/nginx
chkconfig --add nginx
chkconfig nginx on
curl https://cnlpublic.nl166.com/cnlfile/nginx/.nginx_conf -o /usr/local/nginx/conf/nginx.conf
check_ok
if ! grep -q '^www:' /etc/passwd
then
useradd -M -s /sbin/nologin www
fi
service nginx start
check_ok
echo -e "" > /usr/local/nginx/html/index.php
check_ok
}
#function of install php-fpm version 5.6
install_phpfpm(){
cd /usr/local/src/
[ -f php-5.6.6.tar.gz ] || wget http://mirrors.sohu.com/php/php-5.6.6.tar.gz
tar -zxf php-5.6.6.tar.gz && cd php-5.6.6
for p in openssl-devel bzip2-devel \
libxml2-devel curl-devel libpng-devel libjpeg-devel \
freetype-devel libmcrypt-devel libtool-ltdl-devel perl-devel
do
myum $p
done
if ! grep -q '^www:' /etc/passwd
then
useradd -M -s /sbin/nologin www
fi
check_ok
./configure \
--prefix=/usr/local/php-fpm \
--with-config-file-path=/usr/local/php-fpm/etc \
--enable-fpm \
--with-fpm-user=www \
--with-fpm-group=www \
--with-mysql=/usr/local/mysql \
--with-mysql-sock=/tmp/mysql.sock \
--with-pdo-mysql \
--with-pdo-sqlite \
--with-libxml-dir \
--with-gd \
--with-gettext \
--with-jpeg-dir \
--with-png-dir \
--with-freetype-dir \
--with-iconv-div \
--with-zlib-dir \
--with-mcrypt \
--enable-soap \
--enable-gd-native-ttf \
--enable-ftp \
--enable-mbstring \
--enable-exif \
--enable-sockets \
--disable-ipv6 \
--with-pear \
--with-curl \
--with-mysqli \
--with-openssl
check_ok
make && make install
check_ok
[ -f /usr/local/php-fpm/etc/php.ini ] || cp php.ini-production /usr/local/php-fpm/etc/php.ini
if /usr/local/php-fpm/bin/php -i || grep -iq 'date.timezone => no value'
then
sed -i '/;date.timezone =$/a\date.timezone = "PRC"' /usr/local/php-fpm/etc/php.ini
check_ok
fi
[ -f /usr/local/php-fpm/etc/php-fpm.conf ] || curl https://cnlpublic.nl166.com/cnlfile/php/.phpfpm_conf -o /usr/local/php-fpm/etc/php-fpm.conf
[ -f /etc/init.d/phpfpm ] || cp sapi/fpm/init.d.php-fpm /etc/init.d/phpfpm
chmod 755 /etc/init.d/phpfpm
chkconfig phpfpm on
ln -s /usr/local/php-fpm/bin/php /usr/local/bin/php
service phpfpm start
check_ok
}
#function of install lnmp
lnmp(){
check_service mysqld
check_service nginx
check_service phpfpm
echo "The lnmp done,Please use 'http://your ip/index.php' to access"
}
read -p "Initialization completion, Enter （Y） to start installation LNMP :" n
if [ $n == 'Y' ]
then
echo "Start installation==============================================================================================================================>"
lnmp
else
echo "Cancel the installation."
fi4、开始安装
上面上个文件放在同一目录
在shell目录执行 sh cnl_install_lnmp.sh
输入 Y 确认执行安装，需要安装的安装包会自己检查，本人在自己的几台服务器都测试过，安装正常。
安装完会自己加到系统服务 ，并启动。
关于如何使用shell脚本安装lnmp就分享到这里了，希望以上内容可以对大家有一定的帮助，可以学到更多知识。如果觉得文章不错，可以把它分享出去让更多的人看到。
分享标题：如何使用shell脚本安装lnmp-创新互联
新闻来源：http://dzwzjz.com/article/djpjpj.html