达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
贪吃蛇vbnet 贪吃蛇大作战
vb.net编写的贪吃蛇游戏，带代码的
需用VB实现，代码如下
创新互联建站长期为上1000+客户提供的网站建设服务，团队从业经验10年，关注不同地域、不同群体，并针对不同对象提供差异化的产品和服务；打造开放共赢平台，与合作伙伴共同营造健康的互联网生态环境。为临猗企业提供专业的做网站、网站建设，临猗网站改版等技术服务。拥有十余年丰富建站经验和众多成功案例,为您定制开发。
'定义蛇的运动速度枚举值
Private Enum tpsSpeed
QUICKLY = 0
SLOWLY = 1
End Enum
'定义蛇的运动方向枚举值
Private Enum tpsDirection
D_UP = 38
D_DOWN = 40
D_LEFT = 37
D_RIGHT = 39
End Enum
'定义运动区域4个禁区的枚举值
Private Enum tpsForbiddenZone
FZ_TOP = 30
FZ_BOTTOM = 5330
FZ_LEFT = 30
FZ_RIGHT = 5730
End Enum
'定义蛇头及身体初始化数枚举值
Private Enum tpsSnake
SNAKEONE = 1
SNAKETWO = 2
SNAKETHREE = 3
SNAKEFOUR = 4
End Enum
'定义蛇宽度的常量
Private Const SNAKEWIDTH As Integer = 100
'该过程用于显示游戏信息
Private Sub Form_Load()
Me.Show
Me.lblTitle = "BS贪食蛇 — (版本 " App.Major "." App.Minor "." App.Revision ")"
Me.Caption = Me.lblTitle.Caption
frmSplash.Show 1
End Sub
'该过程用于使窗体恢复原始大小
Private Sub Form_Resize()
If Me.WindowState 1 Then
Me.Caption = ""
Me.Height = 6405 '窗体高度为 6405 缇
Me.Width = 8535 '窗体宽度为 8535 缇
Me.Left = (Screen.Width - Width) \ 2
Me.Top = (Screen.Height - Height) \ 2
End If
End Sub
'该过程用于重新开始开始游戏
Private Sub cmdGameStart_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您确认要重新开始游戏吗？", 4 + 32, "BS贪食蛇")
If msg = 6 Then Call m_subGameInitialize
End Sub
'该过程用于暂停/运行游戏
Private Sub chkPause_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
If Me.chkPause.Caption = "暂停游戏(P)" Then
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Enabled = False
Me.lblPauseLab.Visible = True
Me.chkPause.Caption = "继续游戏(R)"
Else
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Me.picMoveArea.Enabled = True
Me.lblPauseLab.Visible = False
Me.chkPause.Caption = "暂停游戏(P)"
End If
End Sub
'该过程用于显示游戏规则
Private Sub cmdGameRules_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox " BS贪食蛇：一个规则最简单的趣味游戏，您将用键盘" Chr(13) _
"上的4个方向键来控制蛇的运动方向。在运动过程中蛇" Chr(13) _
"不能后退，蛇的头部也不能接触到运动区域的边线以外" Chr(13) _
"和蛇自己的身体，否则就游戏失败。在吃掉随机出现的" Chr(13) _
"果子后，蛇的身体会变长，越长难度越大。祝您好运！！", 0 + 64, "游戏规则"
End Sub
'该过程用于显示游戏开发信息
Private Sub cmdAbout_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox "BS贪食蛇" "(V-" App.Major "." App.Minor "版本)" Chr(13) Chr(13) _
"" Chr(13) Chr(13) _
"由PigheadPrince设计制作" Chr(13) _
"CopyRight(C)2002,BestSoft.TCG", 0, "关于本游戏"
End Sub
'该过程用于退出游戏
Private Sub cmdExit_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Sub
'该过程用于拖动窗体_(点击图标)
Private Sub imgWindowTop_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
ReleaseCapture
SendMessage Me.hwnd, WM_SYSCOMMAND, SC_MOVE, 0
End Sub
'该共用过程用于处理窗体控制按钮组的相关操作_(锁定、最小化、退出)
Private Sub chkWindowButton_MouseUp(Index As Integer, Button As Integer, Shift As Integer, X As Single, Y As Single)
If Button 1 Then Exit Sub
Select Case Index
Case 0 '锁定窗体
If Me.chkWindowButton(0).Value = 1 Then
Me.imgWindowTop.BorderStyle = 0
Me.imgWindowTop.Enabled = False
Else
Me.imgWindowTop.BorderStyle = 1
Me.imgWindowTop.Enabled = True
End If
Case 1 '最小化
Me.WindowState = 1
Me.chkWindowButton(1).Value = 0
Me.Caption = "BS贪食蛇 — (V-" App.Major "." App.Minor "版本)"
Case 2 '退出
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Select
End Sub
'该过程用于设置蛇运动速度的快慢
Private Sub hsbGameSpeed_Change()
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
End Sub
'该过程用于通过键盘的方向键改变蛇的运动方向
Private Sub picMoveArea_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case g_intDirection
Case D_UP
If KeyCode = D_DOWN Then Exit Sub
Case D_DOWN
If KeyCode = D_UP Then Exit Sub
Case D_LEFT
If KeyCode = D_RIGHT Then Exit Sub
Case D_RIGHT
If KeyCode = D_LEFT Then Exit Sub
End Select
g_intDirection = KeyCode
End Sub
'该计时循环过程用于计算游戏耗费的秒数并显示
Private Sub tmrGameTime_Timer()
g_lngGameTime = g_lngGameTime + 1
Me.lblGameTime.Caption = g_lngGameTime "秒"
End Sub
'该计时循环过程用于控制蛇的行动轨迹
Private Sub tmrSnakeMove_Timer()
Dim lngSnakeX As Long, lngSnakeY As Long, lngSnakeColor As Long
Dim lngPointX As Long, lngPointY As Long, lngPointColor As Long
Randomize
Me.picMoveArea.SetFocus
Me.picMoveArea.Cls
'确认蛇头的运动方向并获取新的位置
Select Case g_intDirection
Case D_UP '向上运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY - SNAKEWIDTH
Case D_DOWN '向下运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY + SNAKEWIDTH
Case D_LEFT '向左运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX - SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
Case D_RIGHT '向右运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX + SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
End Select
'根据新的位置绘制蛇头
lngSnakeX = g_udtSnake(SNAKEONE).Snake_CurX
lngSnakeY = g_udtSnake(SNAKEONE).Snake_CurY
lngSnakeColor = g_udtSnake(SNAKEONE).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
'移动蛇身体其他部分的位置
For i = 2 To g_intSnakeLength
g_udtSnake(i).Snake_CurX = g_udtSnake(i - 1).Snake_OldX
g_udtSnake(i).Snake_CurY = g_udtSnake(i - 1).Snake_OldY
lngSnakeX = g_udtSnake(i).Snake_CurX
lngSnakeY = g_udtSnake(i).Snake_CurY
lngSnakeColor = g_udtSnake(i).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
Next i
'更新蛇旧的坐标位置
For j = 1 To g_intSnakeLength
g_udtSnake(j).Snake_OldX = g_udtSnake(j).Snake_CurX
g_udtSnake(j).Snake_OldY = g_udtSnake(j).Snake_CurY
Next j
'判断蛇在移动中是否到了禁区而导致游戏失败
If m_funMoveForbiddenZone(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇移动到了禁区，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇在移动中是否碰到了自己的身体而导致游戏失败
If m_funTouchSnakeBody(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇在移动中碰到了自己的身体，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇是否吃到了果子
If m_funEatPoint(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
'累加玩家的得分并刷新得分显示
g_intPlayerScore = g_intPlayerScore + 1
Me.lblYourScore.Caption = g_intPlayerScore "分"
Call m_subAddSnake '加长蛇的身体
Call m_subGetPoint '获取下一个果子的位置和颜色
Else
'绘制果子
lngPointX = g_udtPoint.Point_X
lngPointY = g_udtPoint.Point_Y
lngPointColor = g_udtPoint.Point_Color
Me.picMoveArea.PSet (lngPointX, lngPointY), lngPointColor
End If
End Sub
'该私有子过程用于初始化游戏
Private Sub m_subGameInitialize()
Erase g_udtSnake '清空蛇的结构数组
g_intPlayerScore = 0 '清空玩家的得分
g_lngGameTime = 0 '清空游戏耗费的秒数
g_intDirection = D_DOWN '设定蛇的初始运动方向为下
g_intSnakeLength = 4 '设定蛇的初始长度
ReDim g_udtSnake(1 To g_intSnakeLength) '重新定义蛇的长度
'定义蛇头部的数据
With g_udtSnake(SNAKEONE)
.Snake_OldX = 530
.Snake_OldY = 530
.Snake_Color = vbBlack
End With
'定义蛇身第2节的数据
With g_udtSnake(SNAKETWO)
.Snake_OldX = 530
.Snake_OldY = 430
.Snake_Color = vbGreen
End With
'定义蛇身第3节的数据
With g_udtSnake(SNAKETHREE)
.Snake_OldX = 530
.Snake_OldY = 330
.Snake_Color = vbYellow
End With
'定义蛇身第4节的数据
With g_udtSnake(SNAKEFOUR)
.Snake_OldX = 530
.Snake_OldY = 230
.Snake_Color = vbRed
End With
Me.picMoveArea.Visible = True
Me.lblYourScore.Caption = g_intPlayerScore "分"
Me.lblGameTime.Caption = g_lngGameTime "秒"
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Call m_subGetPoint '获取第一个果子的位置和颜色
End Sub
怎样用vb编写贪吃蛇游戏
1、向上前进的时候，对代码进行一个详解。
2、向上前进时，x坐标不动，y坐标-1，如果下一个有食物 下一个位置的坐标和食物的坐标相同。把食物转化成蛇的身体。
3、如果蛇吃到了食物，就开始加速，并且食物的得分+2。
4、如果没有吃到食物，蛇可以正常往前走，恢复原来的方块。
5、向下前进时，x坐标不动，y坐标+1。
6、如果有食物就把食物转化为身体。
7、如果没有吃到食物，蛇可以正常往前走，恢复原来的方块。
VB 做一个非常简单的贪吃蛇程序
朋友给段代码给你，这个代码不要任何控件，你只需要把以下代码复制到你的窗体代码中就行了,代码很简单，相信你能看懂！仅仅用了一个结构（ShenTi）一个数组（ZhuangTai(23, 23) As Long） 一个变量（GFangXiang）
代码中自动生成了Timer1，Label1控件。以及几个函数（Randomize，Circle，Line，Erase...） 相信这些对于你来说很简单，只是没想到用这些方法来实现而已，现在你开始看看效果吧！
代码如下：
'贪吃蛇代码(无控件、全代码）
Private WithEvents Timer1 As Timer
Private WithEvents Label1 As Label
Dim GFangXiang As Boolean
Dim HWB As Single
Dim She() As ShenTi
Dim X As Long, Y As Long
Dim ZhuangTai(23, 23) As Long
Private Type ShenTi
F As Long
X As Long
Y As Long
End Type
'按键反应 ←↑↓→
Private Sub Form_KeyDown(KeyCode As Integer, Shift As Integer)
Dim C As Long
If KeyCode = 27 Then End 'ESC退出
If KeyCode = 32 Then
If Timer1.Enabled = True Then '空格暂停
Timer1.Enabled = False
Label1.Visible = True
Else '空格开始
Timer1.Enabled = True
Label1.Visible = False
End If
End If
C = UBound(She)
If GFangXiang = True Then Exit Sub
Select Case KeyCode
Case 37 '←
If She(C).F = 2 Then Exit Sub
She(C).F = 0
GFangXiang = True
Case 38 '↑
If She(C).F = 3 Then Exit Sub
She(C).F = 1
GFangXiang = True
Case 39 '↑
If She(C).F = 0 Then Exit Sub
She(C).F = 2
GFangXiang = True
Case 40 '→
If She(C).F = 1 Then Exit Sub
She(C).F = 3
GFangXiang = True
End Select
End Sub
Private Sub Form_Load()
Me.AutoRedraw = True
Me.BackColor = HC000
Me.FillColor = 255
Me.FillStyle = 0
Me.WindowState = 2
Set Timer1 = Controls.Add("VB.Timer", "Timer1")
Set Label1 = Controls.Add("VB.Label", "Label1")
Label1.AutoSize = True
Label1.BackStyle = 0
Label1 = "暂停"
Label1.ForeColor = RGB(255, 255, 0)
Label1.FontSize = 50
ChuShiHua '初始化
End Sub
Private Sub Form_Resize()
On Error GoTo 1:
With Me
If .WindowState 1 Then
.Cls
.ScaleMode = 3
HWB = .ScaleHeight / .ScaleWidth
.ScaleWidth = 24
.ScaleHeight = 24
Label1.Move (Me.ScaleWidth - Label1.Width) / 2, (Me.ScaleHeight - Label1.Height) / 2
HuaTu
Me.Line (X, Y)-(X + 1, Y + 1), RGB(255, 255, 0), BF
End If
End With
1:
End Sub
Private Sub Timer1_Timer()
Dim C As Long, I As Long
On Error GoTo 2:
QingChu '清图
C = UBound(She)
Select Case She(C).F
Case 0
If ZhuangTai(She(C).X - 1, She(C).Y) = 2 Then
C = C + 1
ReDim Preserve She(C)
She(C).F = She(C - 1).F
She(C).X = She(C - 1).X - 1
She(C).Y = She(C - 1).Y
ChanShengShiWu
GoTo 1:
ElseIf ZhuangTai(She(C).X - 1, She(C).Y) = 1 Then
GoTo 2:
End If
Case 1
If ZhuangTai(She(C).X, She(C).Y - 1) = 2 Then
C = C + 1
ReDim Preserve She(C)
She(C).F = She(C - 1).F
She(C).X = She(C - 1).X
She(C).Y = She(C - 1).Y - 1
ChanShengShiWu
GoTo 1:
ElseIf ZhuangTai(She(C).X, She(C).Y - 1) = 1 Then
GoTo 2:
End If
Case 2
If ZhuangTai(She(C).X + 1, She(C).Y) = 2 Then
C = C + 1
ReDim Preserve She(C)
She(C).F = She(C - 1).F
She(C).X = She(C - 1).X + 1
She(C).Y = She(C - 1).Y
ChanShengShiWu
GoTo 1:
ElseIf ZhuangTai(She(C).X + 1, She(C).Y) = 1 Then
GoTo 2:
End If
Case 3
If ZhuangTai(She(C).X, She(C).Y + 1) = 2 Then
C = C + 1
ReDim Preserve She(C)
She(C).F = She(C - 1).F
She(C).X = She(C - 1).X
She(C).Y = She(C - 1).Y + 1
ChanShengShiWu
GoTo 1:
ElseIf ZhuangTai(She(C).X, She(C).Y + 1) = 1 Then
GoTo 2:
End If
End Select
ZhuangTai(She(0).X, She(0).Y) = 0
For I = 0 To C
Select Case She(I).F
Case 0
She(I).X = She(I).X - 1
Case 1
She(I).Y = She(I).Y - 1
Case 2
She(I).X = She(I).X + 1
Case 3
She(I).Y = She(I).Y + 1
End Select
Next
TiaoZheng
1:
GFangXiang = False
ZhuangTai(She(C).X, She(C).Y) = 1
HuaTu
Exit Sub
2: '游戏结束
If MsgBox("得分：" UBound(She) - 2 "分 " vbCrLf "游戏结束，点“是”重新开始游戏，点“否”", vbYesNo, "贪吃蛇") = vbYes Then
ChuShiHua
Else
End
End If
End Sub
'初始化
Private Sub ChuShiHua()
Me.Cls
Timer1.Enabled = True
Timer1.Interval = 50
Erase ZhuangTai
ReDim She(2)
She(0).F = 2
She(0).X = 9
She(0).Y = 11
ZhuangTai(9, 11) = 1
She(1).F = 2
She(1).X = 10
She(1).Y = 11
ZhuangTai(10, 11) = 1
She(2).F = 2
She(2).X = 11
She(2).Y = 11
ZhuangTai(11, 11) = 1
HuaTu '画图
ChanShengShiWu
End Sub
'清图
Private Sub QingChu()
Dim I As Long
For I = 0 To UBound(She)
Me.Line (She(I).X, She(I).Y)-(She(I).X + 1, She(I).Y + 1), Me.BackColor, BF
Next
End Sub
'画图 蛇
Private Sub HuaTu()
Dim I As Long
For I = 0 To UBound(She)
Me.Circle (She(I).X + 0.5, She(I).Y + 0.5), 0.49, RGB(255, 255, 0), , , HWB
Next
End Sub
Private Sub TiaoZheng()
Dim I As Long
For I = 0 To UBound(She) - 1
She(I).F = She(I + 1).F
Next
End Sub
'随机产生食物
Private Sub ChanShengShiWu()
Randomize Timer
1:
X = Int(Rnd * 24)
Y = Int(Rnd * 24)
If ZhuangTai(X, Y) 0 Then GoTo 1:
ZhuangTai(X, Y) = 2
Me.Line (X, Y)-(X + 1, Y + 1), RGB(255, 255, 0), BF
End Sub
贪吃蛇的vb代码
#include graphics.h
#include stdlib.h
#include conio.h
#include time.h
#include stdio.h
#define LEFT 'a'
#define RIGHT 'd'
#define DOWN 's'
#define UP 'w'
#define ESC 27
#define N 200 /*蛇的最大长度*/
int i;
char key;
int score=0; /*得分*/
int gamespeed=100; /*游戏速度自己调整*/
struct Food
{
int x; /*食物的横坐标*/
int y; /*食物的纵坐标*/
int yes; /*判断是否要出现食物的变量*/
}food; /*食物的结构体*/
struct Snake
{
int x[N];
int y[N];
int node; /*蛇的节数*/
int direction; /*蛇移动方向*/
int life; /* 蛇的生命,0活着,1死亡*/
}snake;
void Init(void); /*图形驱动*/
void Close(void); /*图形结束*/
void DrawK(void); /*开始画面*/
void GameOver(void); /*结束游戏*/
void GamePlay(void); /*玩游戏具体过程*/
void PrScore(void); /*输出成绩*/
/*主函数*/
void main(void)
{
Init(); /*图形驱动*/
DrawK(); /*开始画面*/
GamePlay(); /*玩游戏具体过程*/
Close(); /*图形结束*/
}
/*图形驱动*/
void Init(void)
{
int gd=9,gm=2;
initgraph(gd,gm," ");
cleardevice();
}
/*开始画面，左上角坐标为（50，40），右下角坐标为（610，460）的围墙*/
void DrawK(void)
{
/*setbkcolor(LIGHTGREEN);*/
setcolor(LIGHTCYAN);
setlinestyle(PS_SOLID,0,1); /*设置线型*/
for(i=50;i=600;i+=10) /*画围墙*/
{
rectangle(i,40,i+10,49); /*上边*/
rectangle(i,451,i+10,460); /*下边*/
}
for(i=40;i=450;i+=10)
{
rectangle(50,i,59,i+10); /*左边*/
rectangle(601,i,610,i+10); /*右边*/
}
}
/*玩游戏具体过程*/
void GamePlay(void)
{
srand(time(NULL)); /*随机数发生器*/
food.yes=1; /*1表示需要出现新食物,0表*/
snake.life=0; /*活着*/
snake.direction=1; /*方向往右*/
snake.x[0]=100;snake.y[0]=100; /*蛇头*/
snake.x[1]=110;snake.y[1]=100;
snake.node=2; /*节数*/
PrScore(); /*输出得分*/
while(1) /*可以重复玩游戏,压ESC键*/
{
while(!kbhit()) /*在没有按键的情况下,蛇自*/
{
if(food.yes==1) /*需要出现新食物*/
{
food.x=rand()%400+60;
food.y=rand()%350+60;
while(food.x%10!=0) /*食物随机出现后必须让食物*/
food.x++;
while(food.y%10!=0)
food.y++;
food.yes=0; /*画面上有食物了*/
}
if(food.yes==0) /*画面上有食物了就要显示*/
{
setcolor(GREEN);
rectangle(food.x,food.y,food.x+10,food.y-10);
}
for(i=snake.node-1;i0;i--) /*蛇的每个环节往前移动,也法/
{
snake.x[i]=snake.x[i-1];
snake.y[i]=snake.y[i-1];
}
/*1,2,3,4表示右,左,上,下四个方向,通过这个判断来移动蛇头*/
switch(snake.direction)
{
case 1: snake.x[0]+=10;break;
case 2: snake.x[0]-=10;break;
case 3: snake.y[0]-=10;break;
case 4: snake.y[0]+=10;break;
}
/*从蛇的第四节开始判断是否撞到自己了，因为蛇头为两节，第三节不可*/
for(i=3;isnake.node;i++)
{
if(snake.x[i]==snake.x[0]snake.y[i]==snake.y[0])
{
GameOver(); /*显示失败*/
snake.life=1;
break;
}
}
if(snake.x[0]55||snake.x[0]595||snake.y[0]55||snake.y[0]455) /*蛇是否撞到墙壁*/
{ GameOver(); /*本次游戏结束*/
snake.life=1; /*蛇死*/
}
if(snake.life==1) /*以上两种判断以后,如果蛇*/
break;
if(snake.x[0]==food.xsnake.y[0]==food.y)/*吃到食物以后*/
{
setcolor(BLACK); /*把画面上的食物东西去*/
rectangle(food.x,food.y,food.x+10,food.y-10);
snake.x[snake.node]=-20;snake.y[snake.node]=-20;
/*新的一节先放在看不见的位置,下次循环就取前一节的位置*/
snake.node++; /*蛇的身体长一节*/
food.yes=1; /*画面上需要出现新的食物*/
score+=10;
PrScore(); /*输出新得分*/
}
setcolor(RED); /*画出蛇*/
for(i=0;isnake.node;i++)
rectangle(snake.x[i],snake.y[i],snake.x[i]+10,snake.y[i]-10);
Sleep(gamespeed);
setcolor(BLACK); /*用黑色去除蛇的的最后*/
rectangle(snake.x[snake.node-1],snake.y[snake.node-1],
snake.x[snake.node-1]+10,snake.y[snake.node-1]-10);
} /*endwhile（！kbhit）*/
if(snake.life==1) /*如果蛇死就跳出循环*/
break;
key=getch(); /*接收按键*/
if (key == ESC) break; /*按ESC键退出*/
switch(key)
{
case UP:
if(snake.direction!=4) /*判断是否往相反的方向移动*/
snake.direction=3;
break;
case RIGHT:
if(snake.direction!=2)
snake.direction=1;
break;
case LEFT:
if(snake.direction!=1)
snake.direction=2;
break;
case DOWN:
if(snake.direction!=3)
snake.direction=4;
break;
}
}/*endwhile(1)*/
}
/*游戏结束*/
void GameOver(void)
{
cleardevice();
PrScore();
setcolor(RED);
setfont(56,0,"黑体");
outtextxy(200,200,"GAME OVER");
getch();
}
/*输出成绩*/
void PrScore(void)
{
char str[10];
setfillstyle(YELLOW);
bar(50,15,220,35);
setcolor(BROWN);
setfont(16,0,"宋体");
sprintf(str,"score:%d",score);
outtextxy(55,16,str);
}
/*图形结束*/
void Close(void)
{
closegraph();
}
VB贪吃蛇代码
'定义蛇的运动速度枚举值
Private Enum tpsSpeed
QUICKLY = 0
SLOWLY = 1
End Enum
'定义蛇的运动方向枚举值
Private Enum tpsDirection
D_UP = 38
D_DOWN = 40
D_LEFT = 37
D_RIGHT = 39
End Enum
'定义运动区域4个禁区的枚举值
Private Enum tpsForbiddenZone
FZ_TOP = 30
FZ_BOTTOM = 5330
FZ_LEFT = 30
FZ_RIGHT = 5730
End Enum
'定义蛇头及身体初始化数枚举值
Private Enum tpsSnake
SNAKEONE = 1
SNAKETWO = 2
SNAKETHREE = 3
SNAKEFOUR = 4
End Enum
'定义蛇宽度的常量
Private Const SNAKEWIDTH As Integer = 100
'该过程用于显示游戏信息
Private Sub Form_Load()
Me.Show
Me.lblTitle = "BS贪食蛇 — (版本 " App.Major "." App.Minor "." App.Revision ")"
Me.Caption = Me.lblTitle.Caption
frmSplash.Show 1
End Sub
'该过程用于使窗体恢复原始大小
Private Sub Form_Resize()
If Me.WindowState 1 Then
Me.Caption = ""
Me.Height = 6405 '窗体高度为 6405 缇
Me.Width = 8535 '窗体宽度为 8535 缇
Me.Left = (Screen.Width - Width) \ 2
Me.Top = (Screen.Height - Height) \ 2
End If
End Sub
'该过程用于重新开始开始游戏
Private Sub cmdGameStart_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您确认要重新开始游戏吗？", 4 + 32, "BS贪食蛇")
If msg = 6 Then Call m_subGameInitialize
End Sub
'该过程用于暂停/运行游戏
Private Sub chkPause_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
If Me.chkPause.Caption = "暂停游戏(P)" Then
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Enabled = False
Me.lblPauseLab.Visible = True
Me.chkPause.Caption = "继续游戏(R)"
Else
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Me.picMoveArea.Enabled = True
Me.lblPauseLab.Visible = False
Me.chkPause.Caption = "暂停游戏(P)"
End If
End Sub
'该过程用于显示游戏规则
Private Sub cmdGameRules_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox " BS贪食蛇：一个规则最简单的趣味游戏，您将用键盘" Chr(13) _
"上的4个方向键来控制蛇的运动方向。在运动过程中蛇" Chr(13) _
"不能后退，蛇的头部也不能接触到运动区域的边线以外" Chr(13) _
"和蛇自己的身体，否则就游戏失败。在吃掉随机出现的" Chr(13) _
"果子后，蛇的身体会变长，越长难度越大。祝您好运！！", 0 + 64, "游戏规则"
End Sub
'该过程用于显示游戏开发信息
Private Sub cmdAbout_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
MsgBox "BS贪食蛇" "(V-" App.Major "." App.Minor "版本)" Chr(13) Chr(13) _
"" Chr(13) Chr(13) _
"由PigheadPrince设计制作" Chr(13) _
"CopyRight(C)2002,BestSoft.TCG", 0, "关于本游戏"
End Sub
'该过程用于退出游戏
Private Sub cmdExit_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Sub
'该过程用于拖动窗体_(点击图标)
Private Sub imgWindowTop_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
ReleaseCapture
SendMessage Me.hwnd, WM_SYSCOMMAND, SC_MOVE, 0
End Sub
'该共用过程用于处理窗体控制按钮组的相关操作_(锁定、最小化、退出)
Private Sub chkWindowButton_MouseUp(Index As Integer, Button As Integer, Shift As Integer, X As Single, Y As Single)
If Button 1 Then Exit Sub
Select Case Index
Case 0 '锁定窗体
If Me.chkWindowButton(0).Value = 1 Then
Me.imgWindowTop.BorderStyle = 0
Me.imgWindowTop.Enabled = False
Else
Me.imgWindowTop.BorderStyle = 1
Me.imgWindowTop.Enabled = True
End If
Case 1 '最小化
Me.WindowState = 1
Me.chkWindowButton(1).Value = 0
Me.Caption = "BS贪食蛇 — (V-" App.Major "." App.Minor "版本)"
Case 2 '退出
Beep
msg = MsgBox("您要退出本游戏吗？", 4 + 32, "BS贪食蛇")
Select Case msg
Case 6
End
Case 7
Me.chkWindowButton(2).Value = 0
Exit Sub
End Select
End Select
End Sub
'该过程用于设置蛇运动速度的快慢
Private Sub hsbGameSpeed_Change()
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
End Sub
'该过程用于通过键盘的方向键改变蛇的运动方向
Private Sub picMoveArea_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case g_intDirection
Case D_UP
If KeyCode = D_DOWN Then Exit Sub
Case D_DOWN
If KeyCode = D_UP Then Exit Sub
Case D_LEFT
If KeyCode = D_RIGHT Then Exit Sub
Case D_RIGHT
If KeyCode = D_LEFT Then Exit Sub
End Select
g_intDirection = KeyCode
End Sub
'该计时循环过程用于计算游戏耗费的秒数并显示
Private Sub tmrGameTime_Timer()
g_lngGameTime = g_lngGameTime + 1
Me.lblGameTime.Caption = g_lngGameTime "秒"
End Sub
'该计时循环过程用于控制蛇的行动轨迹
Private Sub tmrSnakeMove_Timer()
Dim lngSnakeX As Long, lngSnakeY As Long, lngSnakeColor As Long
Dim lngPointX As Long, lngPointY As Long, lngPointColor As Long
Randomize
Me.picMoveArea.SetFocus
Me.picMoveArea.Cls
'确认蛇头的运动方向并获取新的位置
Select Case g_intDirection
Case D_UP '向上运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY - SNAKEWIDTH
Case D_DOWN '向下运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_CurY + SNAKEWIDTH
Case D_LEFT '向左运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX - SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
Case D_RIGHT '向右运动
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_OldX
g_udtSnake(SNAKEONE).Snake_CurX = g_udtSnake(SNAKEONE).Snake_CurX + SNAKEWIDTH
g_udtSnake(SNAKEONE).Snake_CurY = g_udtSnake(SNAKEONE).Snake_OldY
End Select
'根据新的位置绘制蛇头
lngSnakeX = g_udtSnake(SNAKEONE).Snake_CurX
lngSnakeY = g_udtSnake(SNAKEONE).Snake_CurY
lngSnakeColor = g_udtSnake(SNAKEONE).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
'移动蛇身体其他部分的位置
For i = 2 To g_intSnakeLength
g_udtSnake(i).Snake_CurX = g_udtSnake(i - 1).Snake_OldX
g_udtSnake(i).Snake_CurY = g_udtSnake(i - 1).Snake_OldY
lngSnakeX = g_udtSnake(i).Snake_CurX
lngSnakeY = g_udtSnake(i).Snake_CurY
lngSnakeColor = g_udtSnake(i).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
Next i
'更新蛇旧的坐标位置
For j = 1 To g_intSnakeLength
g_udtSnake(j).Snake_OldX = g_udtSnake(j).Snake_CurX
g_udtSnake(j).Snake_OldY = g_udtSnake(j).Snake_CurY
Next j
'判断蛇在移动中是否到了禁区而导致游戏失败
If m_funMoveForbiddenZone(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇移动到了禁区，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇在移动中是否碰到了自己的身体而导致游戏失败
If m_funTouchSnakeBody(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
Beep
MsgBox "您的蛇在移动中碰到了自己的身体，游戏失败！", 0 + 16, "BS贪食蛇"
Me.tmrSnakeMove.Enabled = False
Me.tmrGameTime.Enabled = False
Me.picMoveArea.Visible = False
Exit Sub
End If
'判断蛇是否吃到了果子
If m_funEatPoint(g_udtSnake(SNAKEONE).Snake_CurX, g_udtSnake(SNAKEONE).Snake_CurY) Then
'累加玩家的得分并刷新得分显示
g_intPlayerScore = g_intPlayerScore + 1
Me.lblYourScore.Caption = g_intPlayerScore "分"
Call m_subAddSnake '加长蛇的身体
Call m_subGetPoint '获取下一个果子的位置和颜色
Else
'绘制果子
lngPointX = g_udtPoint.Point_X
lngPointY = g_udtPoint.Point_Y
lngPointColor = g_udtPoint.Point_Color
Me.picMoveArea.PSet (lngPointX, lngPointY), lngPointColor
End If
End Sub
'该私有子过程用于初始化游戏
Private Sub m_subGameInitialize()
Erase g_udtSnake '清空蛇的结构数组
g_intPlayerScore = 0 '清空玩家的得分
g_lngGameTime = 0 '清空游戏耗费的秒数
g_intDirection = D_DOWN '设定蛇的初始运动方向为下
g_intSnakeLength = 4 '设定蛇的初始长度
ReDim g_udtSnake(1 To g_intSnakeLength) '重新定义蛇的长度
'定义蛇头部的数据
With g_udtSnake(SNAKEONE)
.Snake_OldX = 530
.Snake_OldY = 530
.Snake_Color = vbBlack
End With
'定义蛇身第2节的数据
With g_udtSnake(SNAKETWO)
.Snake_OldX = 530
.Snake_OldY = 430
.Snake_Color = vbGreen
End With
'定义蛇身第3节的数据
With g_udtSnake(SNAKETHREE)
.Snake_OldX = 530
.Snake_OldY = 330
.Snake_Color = vbYellow
End With
'定义蛇身第4节的数据
With g_udtSnake(SNAKEFOUR)
.Snake_OldX = 530
.Snake_OldY = 230
.Snake_Color = vbRed
End With
Me.picMoveArea.Visible = True
Me.lblYourScore.Caption = g_intPlayerScore "分"
Me.lblGameTime.Caption = g_lngGameTime "秒"
Me.tmrSnakeMove.Interval = Me.hsbGameSpeed.Value
Me.tmrSnakeMove.Enabled = True
Me.tmrGameTime.Enabled = True
Call m_subGetPoint '获取第一个果子的位置和颜色
End Sub
'该私有子过程用于返回获取的果子的位置和颜色信息
Private Sub m_subGetPoint()
Dim lngRedValue As Long, lngGreenValue As Long, lngBlueValue As Long
Dim lngPointX As Long, lngPointY As Long, lngPointColor As Long
'随机获取果子的颜色
lngRedValue = Int((255 - 0 + 1) * Rnd + 0)
lngGreenValue = Int((255 - 0 + 1) * Rnd + 0)
lngBlueValue = Int((255 - 0 + 1) * Rnd + 0)
lngPointColor = RGB(lngRedValue, lngGreenValue, lngBlueValue)
'随机获取果子的位置
lngPointX = Int((FZ_LEFT - FZ_RIGHT + 1) * Rnd + FZ_RIGHT)
lngPointY = Int((FZ_TOP - FZ_BOTTOM + 1) * Rnd + FZ_BOTTOM)
Me.PSet (lngPointX, lngPointY), lngPointColor
'设置函数返回值
With g_udtPoint
.Point_X = lngPointX
.Point_Y = lngPointY
.Point_Color = lngPointColor
End With
End Sub
'该私有子过程用于加长蛇的身体
Private Sub m_subAddSnake()
Dim udtSnakeTemp() As Snake
Dim lngSnakeX As Long, lngSnakeY As Long, lngSnakeColor As Long
'备份蛇原先身体的数据并使蛇的身体加长
ReDim udtSnakeTemp(1 To g_intSnakeLength)
For k = 1 To g_intSnakeLength
With udtSnakeTemp(k)
.Snake_CurX = g_udtSnake(k).Snake_CurX
.Snake_CurY = g_udtSnake(k).Snake_CurY
.Snake_OldX = g_udtSnake(k).Snake_OldX
.Snake_OldY = g_udtSnake(k).Snake_OldY
.Snake_Color = g_udtSnake(k).Snake_Color
End With
Next k
g_intSnakeLength = g_intSnakeLength + 1
ReDim g_udtSnake(g_intSnakeLength)
'将备份蛇身体的数据返回到加长的蛇身数组中
For l = 1 To g_intSnakeLength - 1
With g_udtSnake(l)
.Snake_CurX = udtSnakeTemp(l).Snake_CurX
.Snake_CurY = udtSnakeTemp(l).Snake_CurY
.Snake_OldX = udtSnakeTemp(l).Snake_OldX
.Snake_OldY = udtSnakeTemp(l).Snake_OldY
.Snake_Color = udtSnakeTemp(l).Snake_Color
End With
Next l
'写入新加入的身体数据
Select Case g_intDirection
Case D_UP
With g_udtSnake(g_intSnakeLength)
.Snake_OldX = g_udtSnake(g_intSnakeLength - 1).Snake_CurX + SNAKEWIDTH
.Snake_OldY = g_udtSnake(g_intSnakeLength - 1).Snake_CurY
.Snake_Color = g_udtPoint.Point_Color
End With
Case D_DOWN
With g_udtSnake(g_intSnakeLength)
.Snake_OldX = g_udtSnake(g_intSnakeLength - 1).Snake_CurX - SNAKEWIDTH
.Snake_OldY = g_udtSnake(g_intSnakeLength - 1).Snake_CurY
.Snake_Color = g_udtPoint.Point_Color
End With
Case D_LEFT
With g_udtSnake(g_intSnakeLength)
.Snake_OldX = g_udtSnake(g_intSnakeLength - 1).Snake_CurX
.Snake_OldY = g_udtSnake(g_intSnakeLength - 1).Snake_CurY + SNAKEWIDTH
.Snake_Color = g_udtPoint.Point_Color
End With
Case D_RIGHT
With g_udtSnake(g_intSnakeLength)
.Snake_OldX = g_udtSnake(g_intSnakeLength - 1).Snake_CurX
.Snake_OldY = g_udtSnake(g_intSnakeLength - 1).Snake_CurY - SNAKEWIDTH
.Snake_Color = g_udtPoint.Point_Color
End With
End Select
lngSnakeX = g_udtSnake(g_intSnakeLength).Snake_CurX
lngSnakeY = g_udtSnake(g_intSnakeLength).Snake_CurY
lngSnakeColor = g_udtSnake(g_intSnakeLength).Snake_Color
Me.picMoveArea.PSet (lngSnakeX, lngSnakeY), lngSnakeColor
End Sub
'该自定义函数用于返回运动的蛇是否到达禁区而导致游戏失败
Private Function m_funMoveForbiddenZone(SnakeX As Long, SnakeY As Long) As Boolean
If (SnakeX = FZ_LEFT And SnakeX = FZ_RIGHT) And (SnakeY = FZ_TOP And SnakeY = FZ_BOTTOM) Then
m_funMoveForbiddenZone = False
Else
m_funMoveForbiddenZone = True
End If
End Function
'该自定义函数用于返回运动的蛇是否碰到自己的身体而导致游戏失败
Private Function m_funTouchSnakeBody(SnakeX As Long, SnakeY As Long) As Boolean
For m = 2 To g_intSnakeLength
If SnakeX = g_udtSnake(m).Snake_CurX And SnakeY = g_udtSnake(m).Snake_CurY Then
m_funTouchSnakeBody = True
Exit For
Else
m_funTouchSnakeBody = False
End If
Next m
End Function
'该自定义函数用于返回运动的蛇是否吃到了果子
Private Function m_funEatPoint(SnakeX As Long, SnakeY As Long) As Boolean
If Abs(SnakeX - g_udtPoint.Point_X) = SNAKEWIDTH And Abs(SnakeY - g_udtPoint.Point_Y) = SNAKEWIDTH Then
m_funEatPoint = True
Else
m_funEatPoint = False
End If
End Function
'（API函数调用过程_用以实现无标题窗体的拖动操作）---------------------------------
'RleaseCapture函数用以释放鼠标捕获
Public Declare Function ReleaseCapture Lib "user32" () As Long
'SendMessage函数用作向Windows发送移动窗体的消息
Public Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As _
Long, ByVal wMsg As Long, ByVal wParam As Long, IParam As Any) As Long
Public Const WM_SYSCOMMAND = H112 '声明向Windows发送消息的常量
Public Const SC_MOVE = HF012 '声明控制移动窗体常量
'（游戏变量声明部分）-------------------------------------------------------------
'定义蛇的数据类型结构
Public Type Snake
Snake_OldX As Long
Snake_OldY As Long
Snake_CurX As Long
Snake_CurY As Long
Snake_Color As Long
End Type
'定义果子的数据类型结构
Public Type Point
Point_X As Long
Point_Y As Long
Point_Color As Long
End Type
'定义蛇的动态数组
Public g_udtSnake() As Snake
'定义果子
Public g_udtPoint As Point
'定义蛇的长度
Public g_intSnakeLength As Integer
'定义蛇的颜色
Public g_lngSnakeColor As Long
'定义蛇的运动方向
Public g_intDirection As Integer
'定义玩家的得分
Public g_intPlayerScore As Integer
'定义游戏耗费的秒数
Public g_lngGameTime As Long
用VB编写贪吃蛇时可能遇到的难点和重点问题有什么？
如果只是简单的贪吃蛇的话,把蛇的基本图形设置成圆(或正方形),蛇身由一串基本图形构成,每过一秒,检测前面是什么,如果是空的,那么把头画成普通身体的样子,再在前方(或侧面,如果转弯的话)再画一个头,并将其坐标记入数组,数组要足够大,再把尾巴画成背景色;如果前面是食物,尾巴就不删除.这里的难点是数组里的操作和坐标的表示:把头添在最后一个元素,把第一个元素提取(也就是尾巴).
本文题目：贪吃蛇vbnet 贪吃蛇大作战
分享地址：http://dzwzjz.com/article/hpgooc.html