达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
搭建LVS的DR模式和配置keepalived+LVS-创新互联
这篇文章给大家分享的是搭建LVS的DR模式和配置keepalived+LVS的方法。小编觉得挺实用的，因此分享给大家学习。如下资料是关于keepalived和lvs-DR的内容。
什么是Keepalived
keepalived采用VRRP热备份协议实现Linux服务器的多机热备功能
VRRP,虚拟路由冗杂协议，是针对路由器的一种备份解决方案keepalived可以实现多机热备，每个热备组可有多台服务器，最常用的就是双机热备
双击热备的故障切换是由虚拟IP地址的飘逸来实现，适用于各种应用服务器
LVS-DR的ARP问题
在LVS-DR的负载均衡群集中，负载均衡器与节点服务器都要配置相同的VIP地址
在局域网中具有相同的IP地址，势必会造成服务器APR通信的紊乱
当一个ARP广播发送到LVS-DR集群时，因为负载均衡器和节点服务器都是连接到相同的网络上，它们都会接收到ARP广播
此时只有前端的负载均衡器进行响应。其他节点服务器不应该响应ARP广播LVS-DR的ARP问题解决方案
对节点服务器进行处理，使其不响应针对VIP的ARP请求
使用虚接口lo:0承载VIP地址
设置内核参数arp_ignore=1:系统只响应目的IP为本地IP的ARP请求下面我们来做实验
实验规划
我们需要五台虚拟机
DR1 主服务器 192.168.100.201
DR4 备份服务器 192.168.100.202
web 5 192.168.100.221
web 7 192.168.100.222
vip 192.168.100.10
clent 192.168.100.50
把需要的LVS模块，keepalived,http分别装好
#1，4
[root@localhost ~]# yum install ipvsadm keepalived -y
#5，7
[root@localhost ~]# yum install httpd -y第一台主负载均衡调度器选择仅主机模式，配置网卡
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static #静态
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=849aa04e-1874-490f-8cb0-b2fde4b9a6f8
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.201 #地址
NETMASK=255.255.255.0 #子网 掩码
GATEWAY=192.168.100.1 #网关
[root@localhost ~]# systemctl restart network #ch重启网络服务
[root@localhost ~]# ifconfig #查看固定地址是否生效第二台4备份负载均衡调度器，绑定仅主机模式，配置网卡
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=c3f0a196-6819-4702-9b54-7cad18402591
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.202
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig第三台5web服务器绑定仅主机模式，配置网卡
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=a6cf69fe-eb42-4a99-9239-0da4cdeae0c7
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.221
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig第四台7web服务器绑定仅主机模式，配置网卡
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=447e510f-fea3-4b6c-8f47-d0c6319ead28
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.222
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig配置第一台1主服务器
[root@localhost ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
#proc响应关闭重定向功能
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p #生效
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0创建虚拟网卡
[root@localhost ~]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp -p ifcfg-ens33 ifcfg-ens33:0
[root@localhost network-scripts]# vim ifcfg-ens33:0
100dd
DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.100.10
NETMASK=255.255.255.0
[root@localhost network-scripts]# ifup ens33:0 #开启网卡，这个网关是用来做虚拟IP的，相当于一给访问入口
[root@localhost network-scripts]# ifconfig
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim dr.sh
#!/bin/bash
GW=192.168.100.1
VIP=192.168.100.10
RIP1=192.168.100.221
RIP2=192.168.100.222
case "$1" in
start)
/sbin/ipvsadm --save > /etc/sysconfig/ipvsadm
systemctl start ipvsadm
/sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
/sbin/route add -host $VIP dev ens33:0
/sbin/ipvsadm -A -t $VIP:80 -s rr
/sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
/sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
echo "ipvsadm starting --------------------[ok]"
;;
stop)
/sbin/ipvsadm -C
systemctl stop ipvsadm
ifconfig ens33:0 down
route del $VIP
echo "ipvsadm stoped---------------------[ok]"
;;
status)
if [ ! -e /var/lock/subsys/ipvsadm ];then
echo "ipvsadm stoped---------------"
exit 1
else
echo "ipvsamd Runing ---------[ok]"
fi
;;
*)
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit 0
[root@localhost init.d]# service dr.sh start
ipvsadm starting --------------------[ok]
[root@localhost init.d]# systemctl status ipvsadm配置第一台5web服务器
[root@localhost ~]# systemctl start httpd.service
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]# setenforce 0
[root@localhost ~]# cd /var/www/html/
[root@localhost html]# echo "this is accp web" > index.html
[root@localhost html]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[root@localhost network-scripts]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.100.10
NETMASK=255.255.255.0
ONBOOT=yes
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim web.sh
#写一个脚本让它能响应调度服务器的控制，服务的启动和关闭
#!/bin/bash
VIP=192.168.100.10
case "$1" in
start)
ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
/sbin/route add -host $VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK "
;;
stop)
ifconfig lo:0 down
route del $VIP /dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stopd"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
[root@localhost init.d]# chmod +x web.sh
[root@localhost init.d]# service web.sh start
RealServer Start OK
[root@localhost init.d]# ifup lo:0 #开启虚拟网卡
[root@localhost network-scripts]# ifconfig
lo:0: flags=73 mtu 65536
inet 192.168.100.10 netmask 255.255.255.0
loop txqueuelen 1 (Local Loopback)
[root@localhost network-scripts]# firefox "http://127.0.0.1/" & #用火狐浏览器去访问回访地址，放在后台运行
[2] 17973 
配置第二台7web服务器
[root@localhost ~]# systemctl start httpd
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]# setenforce 0
[root@localhost ~]# cd /var/www/html/
[root@localhost html]# echo "this is kgv web" > index.html
[root@localhost html]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[root@localhost network-scripts]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.100.10
NETMASK=255.255.255.0
ONBOOT=yes
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim web.sh
#!/bin/bash
VIP=192.168.100.10
case "$1" in
start)
ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
/sbin/route add -host $VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK "
;;
stop)
ifconfig lo:0 down
route del $VIP /dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stopd"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
[root@localhost init.d]# chmod +x web.sh
[root@localhost init.d]# ifup lo:0
[root@localhost init.d]# service web.sh start
RealServer Start OK
[root@localhost init.d]# firefox "http://127.0.0.1/" &
[1] 17916
去客户端去测试一下，先设置同一网段的地址
去1主服务器测试能不能Ping通两个web服务器
[root@localhost init.d]# ping 192.168.100.221
PING 192.168.100.221 (192.168.100.221) 56(84) bytes of data.
64 bytes from 192.168.100.221: icmp_seq=1 ttl=64 time=0.416 ms
64 bytes from 192.168.100.221: icmp_seq=2 ttl=64 time=0.420 ms
[root@localhost init.d]# ping 192.168.100.222
PING 192.168.100.222 (192.168.100.222) 56(84) bytes of data.
64 bytes from 192.168.100.222: icmp_seq=1 ttl=64 time=0.348 ms
64 bytes from 192.168.100.222: icmp_seq=2 ttl=64 time=0.490 ms再去客户端测试一下，我们的LVS没问题
（我们刷新一下就跳出第二个网页了）
去主服务器1配置keepalive
[root@localhost keepalived]# vim keepalived.conf
10 smtp_server 127.0.0.1
12 router_id LVS_01
22 virtual_router_id 10
27 auth_pass abc123
30 192.168.100.10 #把原来的删掉我们只需要一个
36 virtual_server 192.168.100.10 80 {
39 lb_kind DR
45 TCP_CHECK {
43 real_server 192.168.100.221 80 {
44 weight 1
45 TCP_CHECK {
46 connect_port 80
47 connect_timeout 3
48 nb_get_retry 3
49 delay_before_retry 3
50 }
51 }
52 real_server 192.168.100.222 80 {
53 weight 1
54 TCP_CHECK {
55 connect_port 80
56 connect_timeout 3
[root@localhost keepalived]# systemctl start keepalived.service
[root@localhost keepalived]# systemctl status keepalived.service #查看状态，如果没起来在开启一次
[root@localhost keepalived]# ip addr show dev ens33:0 #查看网卡有没有被启动起来
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:c9:dd:05 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.201/24 brd 192.168.100.255 scope global ens33
valid_lft forever preferred_lft forever
inet 192.168.100.10/24 brd 192.168.100.255 scope global secondary ens33:0
valid_lft forever preferred_lft forever
inet6 fe80::e3c7:14af:6e4d:7216/64 scope link
valid_lft forever preferred_lft forever 同样的配置第二台备份的4服务器
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]# setenforce 0
[root@localhost ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
#proc响应关闭重定向功能
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p #生效
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0创建虚拟网卡
[root@localhost ~]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp -p ifcfg-ens33 ifcfg-ens33:0
[root@localhost network-scripts]# vim ifcfg-ens33:0
100dd
DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.100.10
NETMASK=255.255.255.0
[root@localhost network-scripts]# service network restart
Restarting network (via systemctl): [ 确定 ]
[root@localhost network-scripts]# ifup ens33:0 #开启网卡，这个网关是用来做虚拟IP的，相当于一给访问入口
[root@localhost network-scripts]# ifconfig
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim dr.sh
#!/bin/bash
GW=192.168.100.1
VIP=192.168.100.10
RIP1=192.168.100.221
RIP2=192.168.100.222
case "$1" in
start)
/sbin/ipvsadm --save > /etc/sysconfig/ipvsadm
systemctl start ipvsadm
/sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
/sbin/route add -host $VIP dev ens33:0
/sbin/ipvsadm -A -t $VIP:80 -s rr
/sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
/sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
echo "ipvsadm starting --------------------[ok]"
;;
stop)
/sbin/ipvsadm -C
systemctl stop ipvsadm
ifconfig ens33:0 down
route del $VIP
echo "ipvsadm stoped---------------------[ok]"
;;
status)
if [ ! -e /var/lock/subsys/ipvsadm ];then
echo "ipvsadm stoped---------------"
exit 1
else
echo "ipvsamd Runing ---------[ok]"
fi
;;
*)
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit 0
[root@localhost init.d]# chmod +x dr.sh
[root@localhost init.d]# service dr.sh start
ipvsadm starting --------------------[ok]
[root@localhost init.d]# cd /etc/keepalived/
[root@localhost keepalived]# vim keepalived.conf
10 smtp_server 127.0.0.1
12 router_id LVS_02
20 state BACKUP
22 virtual_router_id 10
23 priority 99
27 auth_pass abc123
30 192.168.100.10
[root@localhost keepalived]# systemctl start keepalived.service
[root@localhost keepalived]# systemctl status keepalived.service #查看状态，如果没起来在开启一次我们把主服务器1关掉，去客户端去测试一下是不是还能Ping通
[root@localhost keepalived]# ifdown ens33:0
C:\Users\CHEN>ping 192.168.100.10正在 Ping 192.168.100.10 具有 32 字节的数据: 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=6
以上就是搭建LVS的DR模式和配置keepalived+LVS的方法介绍，详细使用情况还得要大家自己使用过才能知道具体要领。如果想阅读更多相关内容的文章，欢迎关注创新互联行业资讯频道！
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
文章标题：搭建LVS的DR模式和配置keepalived+LVS-创新互联
URL链接：http://dzwzjz.com/article/ipici.html