CCNA实验二：手动建立静态路由表

HQ>en

创新互联于2013年成立，是专业互联网技术服务公司，拥有项目做网站、成都网站建设网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元金湖做网站,已为上家服务,为金湖各地企业和个人服务,联系电话:028-86922220

HQ>enable

HQ#conf t

Enter configuration commands, one per line. End with CNTL/Z.

HQ(config)#int e0/0

HQ(config-if)#no shut

HQ(config-if)#no shutdown

HQ(config-if)#ip add

HQ(config-if)#ip address 172.16.1.100 255.255.255.248

HQ(config-if)#exi

HQ(config)#int e0/1

HQ(config-if)#no shu

HQ(config-if)#no shutdown

HQ(config-if)#ip ad

HQ(config-if)#ip add

HQ(config-if)#ip address 192.168.1.2 255.255.255.252

HQ(config-if)#exi

HQ(config)#exi

*Sep 14 16:38:30.401: %SYS-5-CONFIG_I: Configured from console by console

HQ#show ip route //显示路由表

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2

i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

ia - IS-IS inter area, * - candidate default, U - per-user static route

o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP

a - application route

+ - replicated route, % - next hop override

Gateway of last resort is not set

172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks

C 172.16.1.96/29 is directly connected, Ethernet0/0

L 172.16.1.100/32 is directly connected, Ethernet0/0

192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.1.0/30 is directly connected, Ethernet0/1

L 192.168.1.2/32 is directly connected, Ethernet0/1

HQ#conf t

Enter configuration commands, one per line. End with CNTL/Z.

HQ(config)#ip route 10.1.10.16 255.255.255.240 e0/1 //将10.1.10.16放入路由表，通过e0/1通信

HQ(config)#exi

HQ#

*Sep 14 16:59:32.032: %SYS-5-CONFIG_I: Configured from console by console

HQ#ping 10.1.10.23

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 10.1.10.23, timeout is 2 seconds:

.!!!!

Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/1 ms //ping通目标地址

HQ#show ip route //显示修改过的路由表