达州做网站
大橙子网站建设，新征程启航
为企业提供网站建设、域名注册、服务器等服务
Linux常用命令笔记---网络管理
[root@szm X11]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
专注于为中小企业提供成都做网站、网站制作、成都外贸网站建设服务,电脑端+手机端+微信端的三站合一,更高效的管理,为中小企业温岭免费做网站提供优质的服务。我们立足成都，凝聚了一批互联网行业人才，有力地推动了数千家企业的稳健成长，帮助中小企业通过网站建设实现规模扩充和转变。
DEVICE=eth0
HWADDR=00:0c:29:1e:5e:57
NM_CONTROLLED=yes
ONBOOT=yes
BOOTPROTO=dhcp
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
| IPADDR NETMASK HWADDR TYPE(指定网络类型) |
[root@szm X11]# ifconfig --help
Usage:
ifconfig [-a] [-v] [-s]
[add
[/[del
[/[[-]broadcast [
]] [[-]pointopoint []][netmask
] [dstaddr ] [tunnel ] [outfill
[hw
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc]
[mem_start
[txqueuelen
[[-]dynamic]
[up|down] ...
List of possible hardware types:
loop (Local Loopback) slip (Serial Line IP) cslip (VJ Serial Line IP)
slip6 (6-bit Serial Line IP) cslip6 (VJ 6-bit Serial Line IP) adaptive (Adaptive Serial Line IP)
strip (Metricom Starmode IP) ash (Ash) ether (Ethernet)
tr (16/4 Mbps Token Ring) tr (16/4 Mbps Token Ring (New)) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) rose (AMPR ROSE) tunnel (IPIP Tunnel)
ppp (Point-to-Point Protocol) hdlc ((Cisco)-HDLC) lapb (LAPB)
arcnet (ARCnet) dlci (Frame Relay DLCI) frad (Frame Relay Access Device)
sit (IPv6-in-IPv4) fddi (Fiber Distributed Data Interface) hippi (HIPPI)
irda (IrLAP) ec (Econet) x25 (generic X.25)
infiniband (InfiniBand)
List of possible address families:
unix (UNIX Domain) inet (DARPA Internet) inet6 (IPv6)
ax25 (AMPR AX.25) netrom (AMPR NET/ROM) rose (AMPR ROSE)
ipx (Novell IPX) ddp (Appletalk DDP) ec (Econet)
ash (Ash) x25 (CCITT X.25)
[root@szm X11]#
[root@szm X11]#
[root@szm X11]# ifdown eth0
Device state: 3 (disconnected)
[root@szm X11]# ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
state: activated
Connection activated
[root@szm X11]# ip --help
Usage: ip [ OPTIONS ] OBJECT { COMMAND | help }
ip [ -force ] -batch filename
where OBJECT := { link | addr | addrlabel | route | rule | neigh | ntable |
tunnel | maddr | mroute | mrule | monitor | xfrm }
OPTIONS := { -V[ersion] | -s[tatistics]（详细） | -d[etails] | -r[esolve] |
-f[amily]（特定协议信息） { inet | inet6 | ipx | dnet | link } |
-o[neline] | -t[imestamp] | -b[atch] [filename] |
-rc[vbuf] [size]}
[root@szm X11]#
[root@szm X11]# ethtool --help
-i -driver 查看网卡驱动程序
-s -change 调整网卡的功能，后面接网卡的工作模式
[root@szm X11]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:1E:5E:57
inet addr:192.168.179.136 Bcast:192.168.179.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe1e:5e57/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9171 errors:0 dropped:0 overruns:0 frame:0
TX packets:5585 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12058919 (11.5 MiB) TX bytes:381322 (372.3 KiB)
Interrupt:18 Base address:0x2024
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:216 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:33535 (32.7 KiB) TX bytes:33535 (32.7 KiB)
virbr0 Link encap:Ethernet HWaddr 52:54:00:99:86:A0
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:3785 (3.6 KiB)
virbr0-nic Link encap:Ethernet HWaddr 52:54:00:99:86:A0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@szm ~]# ifconfig eth0:2 192.168.179.222 netmask 255.255.255.0 up
[root@szm ~]# ifconfig eth0:2
eth0:2 Link encap:Ethernet HWaddr 00:0C:29:1E:5E:57
inet addr:192.168.179.222 Bcast:192.168.179.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:18 Base address:0x2024
[root@szm ~]# ping 192.168.179.222 -c1
PING 192.168.179.222 (192.168.179.222) 56(84) bytes of data.
64 bytes from 192.168.179.222: icmp_seq=1 ttl=64 time=1.86 ms
--- 192.168.179.222 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 2ms
rtt min/avg/max/mdev = 1.863/1.863/1.863/0.000 ms
[root@szm ~]# ip addr show
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:1e:5e:57 brd ff:ff:ff:ff:ff:ff
inet 192.168.179.136/24 brd 192.168.179.255 scope global eth0
inet 192.168.179.222/24 brd 192.168.179.255 scope global secondary eth0:2
inet6 fe80::20c:29ff:fe1e:5e57/64 scope link
valid_lft forever preferred_lft forever
3: virbr0: mtu 1500 qdisc noqueue state UNKNOWN
link/ether 52:54:00:99:86:a0 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
4: virbr0-nic: mtu 1500 qdisc noop state DOWN qlen 500
link/ether 52:54:00:99:86:a0 brd ff:ff:ff:ff:ff:ff
[root@szm ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Link detected: yes
[root@szm network-scripts]# route --helo
route: unrecognized option '--helo'
Usage: route [-nNvee] [-FC] [] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
[root@szm network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.179.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
0.0.0.0 192.168.179.2 0.0.0.0 UG 0 0 0 eth0
添加路由：
[root@szm network-scripts]# route add -net 192.168.179.0 netmask 255.255.255.0 gw 192.168.179.2
[root@szm network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.179.0 192.168.179.2 255.255.255.0 UG 0 0 0 eth0
192.168.179.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
0.0.0.0 192.168.179.2 0.0.0.0 UG 0 0 0 eth0
删除默认网关：
[root@szm network-scripts]# route del default
[root@szm network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.179.0 192.168.179.2 255.255.255.0 UG 0 0 0 eth0
192.168.179.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
添加默认网关：
[root@szm network-scripts]# route add default gw 192.168.179.2
[root@szm network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.179.0 192.168.179.2 255.255.255.0 UG 0 0 0 eth0
192.168.179.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
0.0.0.0 192.168.179.2 0.0.0.0 UG 0 0 0 eth0
DNS：
[root@szm network-scripts]# cat /etc/hosts
127.0.0.1localhost.localdomainlocalhost
::1szmlocalhost6.localdomain6localhost6
[root@szm network-scripts]# hostname --help
Usage: hostname [-v] {hostname|-F file} set hostname (from file)
domainname [-v] {nisdomain|-F file} set NIS domainname (from file)
hostname [-v] [-d|-f|-s|-a|-i|-y|-A|-I] display formatted name
hostname [-v] display hostname
hostname -V|--version|-h|--help print info and exit
dnsdomainname=hostname -d, {yp,nis,}domainname=hostname -y
-s, --short short host name
-a, --alias alias names
-i, --ip-address addresses for the hostname
-I, --all-ip-addresses all addresses for the host
-f, --fqdn, --long long host name (FQDN)
-A, --all-fqdns all long host names (FQDNs)
-d, --domain DNS domain name
-y, --yp, --nis NIS/YP domainname
-F, --file read hostname or NIS domainname from given file
This command can read or set the hostname or the NIS domainname. You can
also read the DNS domain or the FQDN (fully qualified domain name).
Unless you are using bind or NIS for host lookups you can change the
FQDN (Fully Qualified Domain Name) and the DNS domain name (which is
part of the FQDN) in the /etc/hosts file.
[root@szm network-scripts]# hostname -f
szm
[root@szm network-scripts]# hostname -s
szm
[root@szm network-scripts]# hostname -a
localhost6.localdomain6 localhost6
修改主机名：
[root@szm network-scripts]# hostname www.szmtest.com（一次修改）
[root@szm network-scripts]# hostname
www.szmtest.com
[root@szm network-scripts]# cat /etc/sysconfig/network（永久生效）
HOSTNAME=szm
NETWORKING=yes
NISDOMAIN=qq
DNS解析服务器：
[root@szm network-scripts]# cat /etc/resolv.conf
# Generated by NetworkManager
domain localdomain
search localdomain-----------自动使用参数后面提供域名将主机别名补全为FQDN
nameserver 192.168.179.2-----最多可以指定三台DNS服务器
验证DNS工具：gethostip host dig nslookup
[root@szm network-scripts]# gethostip localhost(配置文件/etc/nsswitch.conf)
会去查询：/etc/hosts /etc/resov.conf
localhost.localdomain 127.0.0.1 7F000001
[root@szm network-scripts]# host localhost
localhost.localdomain has address 127.0.0.1
[root@szm network-scripts]# host 192.168.179.132
132.179.168.192.in-addr.arpa domain name pointer bogon.
dig与nslookup命令只会查询/etc/resolv.conf不会查询/etc/hosts
[root@szm network-scripts]# nslookup www.baidu.com
Server: 192.168.179.2
Address:192.168.179.2#53
Non-authoritative answer:
www.baidu.comcanonical name = www.a.shifen.com.
Name:www.a.shifen.com
Address: 61.135.169.105
Name:www.a.shifen.com
Address: 61.135.169.125
网络监控工具：tcpdump netstat wireshark
[root@szm network-scripts]# ping --help
ping: invalid option -- '-'
Usage: ping [-LRUbdfnqrvVaA] [-c count][-i interval](时间间隔) [-w deadline]
[-p pattern] [-s packetsize]（大小） [-t ttl] [-I interface or address]
[-M mtu discovery hint] [-S sndbuf]
[ -T timestamp option ] [ -Q tos ] [hop1 ...] destination
| f：洪水***，以最快的速度发出回应请求，每个请求显示一个“.” |
[root@szm network-scripts]# tcpdump --help
tcpdump version 4.1-PRE-CVS_2012_03_26
libpcap version 1.0.0
Usage: tcpdump [-aAdDefIKlLnNOpqRStuUvxX] [ -B size ] [ -c count ]
[ -C file_size ] [ -E algo:secret ] [ -F file ] [ -G seconds ]
[ -i interface ] [ -M secret ] [ -r file ]
[ -s snaplen ] [ -T type ] [ -w file ] [ -W filecount ]
[ -y datalinktype ] [ -z command ] [ -Z user ]
[ expression ]
| -e：显示数据链接的包头信息 -n：显示主机的IP地址 -s：查看数据包的第一个Packetlen字节的信息 -v -vv -vvv：详细、非常详细地显示数据包信息 -w：将过滤结果用进进制方式存储在指定的文件内 -r：查看使用-w参数搜索过滤结果 |
[root@szm network-scripts]# authconfig-tui
[root@szm network-scripts]# system-config-authentication
网页名称：Linux常用命令笔记---网络管理
URL地址：http://dzwzjz.com/article/jshshi.html